Carroll Shelby Wheels CS10 - 20 x 11 in. - 50mm Offset - Gloss Black - REAR Product Description:
05+ MUST 20X11 BLACK Add a dramatic finishing touch to your ride with the CS10 from Carroll Shelby Wheel Company. The CS10, an updated take on the now-discontinued CS2, offers improved brake clearance, increased durability, and reduced weight. The CS10 comes in 20×9.5 and 20×11 sizes and in four distinct finishes: Gloss Black, Gunmetal, Chrome Powder, and Matte Black w/Machined Face. Independently tested in the U.S.A. to SAE J2530 safety and durability standards, these wheels are built just as strong as the statement they'll make. Features: - Flow-Formed Construction - Stronger & Lighter than Traditional Cast Wheels
- Fits 2005 & Up Mustang - Rear
- Choose from 4 Finishes & 2 Sizes
- Center Cap Included
- Use with 9.5" Wide Front Wheels for Aggressive Staggered Setup
Specs | Backspacing | 7.97 IN | | Backspacing (in) | 7.97 | | Bolt Pattern | 5x4.5 IN | | 5x4.50 IN | | Brand | Carroll Shelby Wheels | | Category | Wheels and Accessories | | Center Bore Diameter | 2.874 IN | | Center Cap Included | Yes | | Clear Coat Finish | Yes | | Clearance Category | Wheels and Accessories | | Color | Black | | Construction | Flow Formed | | Diameter | 20 IN | | Emission Code | 6 | | Finish | Gloss Black | | Grade Type | Performance | | Hub Bore Diameter | 2.874 IN | | 73 MM | | Insert(s) Included | No | | Lug Hole Quantity | 5 | | Lug Nut Insert Included | No | | Material | Flow Formed Aluminum | | Offset | 50 MM | | Offset (mm) | 50 | | Plastic Inlays Included | No | | Product Type | Flow Formed Wheel | | Quantity | 1 | | Sale Category | Wheels and Accessories | | TPMS Compatible | Yes | | TPMS Included | No | | Valve Stem Diameter | 0.453 IN | | Weight | 34 LB | | Wheel Bolt Pattern (in) | 5x4.5 | | 5x4.50 | | Wheel Bolt Pattern (mm) | 5x114.3 | | Wheel Construction | Flow Formed | | Wheel Diameter (in) | 20 | | Wheel Series | CS10 | | Width | 11 IN | | Width (in) | 11 | | UPC | 842110189332 | | Part Number | CS10-211555-B | Actual wheel may vary slightly. These will NOT Fit GT350/500 Mustangs. When fitting a wheel that is wider than 10.5" on the rear of the S197 (2005-14 Mustang), you will need to install an adjustable panhard bar in order to center your rear end. When using wider tires on the back of an S197 Mustang (particularly when the vehicle is lowered) you will notice that the rear end may shift to one side resulting in a lopsided appearance. The adjustable panhard bar will allow you to correct this issue. The vehicle application data for this wheel is a general guideline only. Check bolt pattern, width, back-space (or offset), center bore, and brake caliper clearance to confirm that the desired wheel will fit your vehicle. Many vehicles have been modified & these changes may cause wheel fitment issues (i.e. axle swaps, disc brake / big brake conversions, suspension changes, and other modifications). ALWAYS verify the wheel actually fits on your vehicle BEFORE mounting tires. Wheels are non-returnable after tires have been mounted. 
|
Menu
Close
